D5 Smart Kit Sliding Gate The Centurion D5 smart is a product that makes life easier as it brings solutions from; intelligent reporting to easy-mobile-based setup and operation. It has a 24V system capable of performing more operations and offering extended battery backup and power failure autonomy. The D5 smart comes with a new and improved theft-resistant cage with a patented design offering outstanding security and peace of mind. Vibration sensor that can be connected to a third-party device to notify you in the event that the gate motor is being tampered with. Intelligent battery charger with onboard diagnostics and SMART communication between the charger and the controller Improved position control system incorporating Hall effect technology – highly resistant to interference Kit includes: 2 x 4 Button Nova Remotes 2 x Centurion 7.2Ah 12V Batteries 2 x 2 Meter steel rack 1 x Mounting plate and bolts Old D5 and D5EVO mounting plates can be reused Technical Data D5-SMART Input voltage 90V – 240V AC /-10% @ 50Hz1 Current consumption (Mains) 200mA Battery charger current output 1.3A Maximum number of operations per day 150 Duty cycle – Mains present 2,3 50% Motor voltage 24V DC Motor power supply Battery-driven (Standard Capacity – 2x12V)5 Current consumption (motor at rated load) 13A Input / Output sink currents (Max accessory current draw) I/O 1-4 100mA (12/24V) I/O 5 and 6 3A (12/24V) 10sec Pulse Motor push force – starting 30kgf Motor push force – rated 17kgf Gate mass – maximum 500kg Gate length – maximum 100m Gate speed (varies with load)4 30m/min @ 17kgf Manual Override Lockable with key release Operations in standby with 6Ah battery Half day 5, 6 44 Full day 5, 6 35 Collision Sensing Electronic Operating temperature range -15°C to 50°C On-board receiver type Code-hopping multi channel receiver with selective add and delete Receiver code storage capacity 1500 Remotes7 Receiver frequency 433.92MHz Degree of protection IP55 Mass of unit packed (with standard kit, but excl. rack and battery) 9.1kg Packaging dimensions (with standard kit, but excl. rack and battery) 325mm wide x 244mm deep x 445mm high Category: Gate Automation
