HONEYWELL TC-CCN014 | C300 Controller Module, Experion PKS, New

Description  Key Technical Specifications Parameter Value Model Number TC-CCN014 Product Type C300 Controller Module System Compatibility Honeywell Experion PKS Processor High-performance 32-bit RISC Memory 2 MB I/O Capacity Supports up to 64 I/O modules per controller Communication CEE (Control Execution Environment) bus, FTE (Fault Tolerant Ethernet) Redundancy Supports 1:1 redundant configuration Mounting Plugs into C300 I/O rack Operating Temp 0 to 60°C Power Consumption ~7 W    Product Introduction The Honeywell TC-CCN014 is the main processor module for the C300 controller family, the heart of the Experion PKS Distributed Control System. You’ll find these in refineries, chemical plants, and power generation facilities, executing regulatory control, logic, and data acquisition for thousands of I/O points. In my experience, the C300 platform is rock-solid. The TC-CCN014 handles all control strategies loaded from Control Builder. It supports redundant configurations, meaning you can run two in parallel for bumpless failover. This specific unit is available as new surplus or fully tested refurbished stock. Pricing for legacy automation gear fluctuates; contact us for a current firm quote.  Frequently Asked Questions (FAQ) Q: Can I use the TC-CCN014 as a direct replacement for a TC-CCN013? A: Possibly. The CCN014 is typically a later revision. They are usually backward compatible, but the key is the firmware version. If you swap a CCN013 with a CCN014 running newer firmware, it might have features your current system image doesn’t recognize. In my experience, you need to ensure the firmware on the new module matches the version required by your Control Builder project. Otherwise, it might not handshake properly. Q: Is this module hot-swappable in a redundant pair? A: Yes, that’s the beauty of the C300 design. If you have a redundant pair (TC-CCN014 in Slot A and Slot B), you can pull one module out while the other maintains control. The system will see the failure and the remaining controller will handle the load. However, never pull the primary module in a non-redundant configuration without putting the loop in manual first. That will cause a bump. Q: What kind of testing do you do on a used CCN014? A: We don’t just visually inspect it. We load it into a live C300 test rack with a power supply and I/O. We power it up, check the POST (Power-On Self-Test), and establish communication via FTE. We then run a loopback test to verify the CEE bus communication and load a simple test control module to ensure it executes logic correctly. A 24-hour soak test follows. Q: Does the TC-CCN014 store the control strategy, or is that on a separate card? A: The control strategy (your logic, databases, graphics links) is stored in non-volatile memory on the module itself. However, the project source file is on the engineering station. If you replace the module, you’ll need to download the control strategy from your engineering station into the new module. The module doesn’t “remember” it from the old one unless you’ve specifically backed up the controller’s memory image. Q: I see “TC-CCN014” and “CC-PCNT01” – are these the same? A: They are different generations. The TC-CCN014 is part of the Series C I/O family. The CC-PCNT01 is a later controller module for the same C300 platform, offering more memory and processing power. They are not pin-compatible or direct replacements without a system upgrade. Stick to the exact model your rack is designed for. Q: What is FTE and does this module support it? A: FTE stands for Fault Tolerant Ethernet. Yes, the TC-CCN014 supports it. It’s Honeywell’s proprietary network technology that uses dual, independent networks to provide redundancy and fast failover. This module has the ports to connect to both networks. If one switch or cable fails, communication switches to the other path with no interruption to control. Q: What warranty do you provide? A: We offer a 12-month warranty. This covers defects in materials and workmanship that weren’t caught in our initial testing. It does not cover damage caused by incorrect installation, over-voltage on the backplane, or physical damage. 0-57C404-1E I/O 0-57C405-C CPU 0-57C406-E PLC 0-57C407-4H PLC 0-57C408-B PLC Email: [email protected] Phone: 86 15340683922 Sales:Wu Jiedong Our products are guaranteed for 1 year, with new and original production stopped and imported spare parts. All prices listed on the official website are subject to confirmation by contact: Wu Jiedong (manager). Our product: brand new original packaging Our warranty: All new or repaired parts have a 12 month warranty period beginning Our payment: 100% telegraphic transfer of inventory items before shipment, conditions can be proposed! If you have any downtime spare parts that you cannot find, please feel free to call or use email to contact me. If there are issues that the product cannot solve, please contact me. Product prices can be negotiated. Please do not consider contacting me!